 |
SCR Power Controls
|
HDR SSR ZF1, ZF2 & ZF3 Series Zero Fired SCR Power Controls
|
|
HDR SSR ZF1, ZF2 & ZF3 Series power controllers are reliable and economical
alternatives to other methods of proportional voltage control. These solid
state, noise-free devices have no mechanical or moving parts. These models
provide economical temperature control solutions for ovens, furnaces, extruders,
environmental chambers, HVAC commercial heating, boilers, band heaters and many
other resistive heating applications, which previously used electro-mechanical
or mercury switching devices.
These SCR Power Controls are available configurations Single and Three Phase configurations up to 70 Amps.
SCR
Power Control Literature
 |
Halmar Robicon SSR 100Z Series Zero Fired SCR Power Controls
|
 |
Halmar Robicon SSR 100Z Series power controllers are available for direct
replacement of existing units. In most cases it is best to use the newer
ZF1, ZF2 & ZF3 series controls on new and replacement applications.
SCR
Power Control Literature
|
HDR
SSR PF1 Series Phase Angle Fired SCR Power Controls
|
|
|
HDR SSR PF1 Series power controllers provide economical solutions for oven and
furnace temperature control. SSR PF1 Series power controllers are reliable, economical
alternatives to other methods of proportional voltage control. They have
solid-state devices and no mechanical or moving parts. These SCR Power Controls are available
in Single Phase configurations up to 70 Amps.
SCR
Power Control Literature
|
Halmar Robicon SSR 100P Series Phase Angle Fired SCR Power Controls
|
|
|
Halmar Robicon SSR 100P Series power controllers are available for direct
replacement of existing units. In most cases it is best to use the newer
PF1 series controls on new and replacement applications.
SCR
Power Control Literature
|
HDR ZF Series Zero Fired SCR Power
Controls
|
 |
HDR ZF
Series power controllers are an alternative to mechanical contactors. The ZF
Series typically has less bulk and longer service life than the devices
mentioned. These solid state, noise-free devices and have no mechanical or
moving parts. SCR Power Controllers are used for applications such as
industrial and laboratory furnaces, ovens and kilns, and many other types of
resistive-heating control. These SCR Power Controls are available in
Single and Three Phase configurations 60 to 1200 Amps.
SCR
Power Control Literature
|
Halmar Robicon Z Series Zero Fired SCR Power
Controls
|
 |
Halmar Robicon Z
Series power controllers are drop in replacements for
the older Halmar Robicon Z series SCR power controls.
These SCR Power Controls are available in
Single and Three Phase configurations 60 to 1200 Amps.
SCR
Power Control Literature
|
HDR PF Series Phase Angle Fired SCR Power Controls
|
 |
HDR PF Series, Phase Angle fired SCR Power Controllers offer precise power control for complex applications.
The PF Series provides full wave output with phase-angle fired control.
The PF
Series can be operated into resistive or inductive loads driven directly or
through an interposing transformer.
These SCR Power Controls are available with ratings of 25 to 1200 A
and at 120 to 600 VAC
SCR
Power Control Literature
|
Halmar Robicon PCI Series Phase Angle Fired
SCR Power Controls
|
 |
Halmar Robicon PCI (phase-angle, cosine intercept) Series, Phase Angle fired
SCR Power Controllers offer precise power control for complex applications.
The PCI Series provides full wave output with phase-angle fired control.
These SCR Power Controls are available with ratings of 25 to 1200 A
and at 120 to 600 VAC
SCR
Power Control Literature
|
|
|
|
|
|
Electric Heating
Elements
![[HRule Image]](http://iseinc.com/div.gif){kind=small}
