Digital Pressure & Temperature Indicator/Alarm

Not rated yet

Digital Pressure/Temperature Indicator, optional alarm outputs. Includes recorder output.

REPLACED BY MPT9610 CLICK HERE FOR REPLACEMENT

Call for information!

REPLACED BY MPT9610 CLICK HERE FOR REPLACEMENT

UNIVERSAL PRESSURE INDICATOR

The ISE/Gentan model GT439 Digital Pressure/Temperature indicator/power supply is designed for use with any four leg, 350 ohm Wheatstone bridge pressure transducer. Zero and span can be easily adjusted without removing the module. Shunt calibration is a standard feature.

EASY TO READ LED DISPLAY

The large 4 digit, 1/3 inch LED pressure display is easy to read, even from a distance. Custom face plates are not required for specific scales because every unit can be set for 12 different ranges. Other markings can be easily added for engineering units. The last digit is a fixed zero.

A three digit LED temperature display is also included.

OPTIONAL DUAL ALARM SETPOINTS

Two alarms can be selected for above or below setpoint control. Relays provide N.O. (normally open) and N.C. (normally closed) contacts for maximum flexibility. Adjustments are made through pots on the faceplate.

Provides a choice of recorder outputs, damping constant, transducer sensitivities, input power, shunt-resistor calibrations, peak-hold, and reset options.

 Standard Pressure Ranges:

0-1,500 psig
0-3,000 psig
0-5,000 psig
0-10,000 psig
0-15,000 psig


Accuracy:

Display: 0.1% of full scale

Recorder Output (Pressure Only): 0.1% of full scale

Repeatability: 0.1% of full scale
Linearity: 0.1% of full scale
Stability: 0.1% of full scale

Physical Characteristics:

Size: 1/4 DIN
Display: 4 digit LED, 1/3 inch height, last digit fixed zero and selectable decimal point
Operating Temperature: 0-140F
Weight: 2.5 lbs.



Power:

106-125 or 200-250 VAC, 50/60 hz, 1/8 Amp maximum


Calibration:

Zero Adjustment: 35% with front panel pot
Sensitivity Adjustment (Span): 1-2.5 mV/V or 2.5-5.0 mV/V, Switch selectable and fully adjustable.
Shunt Resistance Calibration: Selectable for Gentran or Dynisco
Response Time (Damping): Selectable at 0.3 or 5.0 seconds



Recorder Output:

Standard: Selectable 0-1 VDC, 0-2 VDC, 0-5 VDC & 0-10 VDC
Optional: 4-20 mA, Load from 15-600 ohms



Transducer Power Supply:
:8.2 VDC 5.0%


 Optional Alarm Outputs:

Dual Relays: 2 SPDT (Single Pole Double Throw)
Relay Rating: 8 Amp @ 125/250 VAC, 5 Amp @ 30 VDC
Set Point Range: 1-100% of full scale
Accuracy: 0.3% of full scale
Hysteresis: 0.5% of full scale
Indication: Front panel LED's
Mode: Above or below set point
Reset: Automatic or manual

 Temperature Characteristics:

Thermocouple Types: J or K
Range: 0-999F or C
Accuracy: 0.5%


.


Additional Information

Click Here to Download Product Literature

    • Weight
      6 lbs
    • SKU
      GT439
    • Mnf#/Vendor#
      GT439
  • Manufacturer
    Gentran
Customer reviews
Please sign in to add review
Please sign in to add review

Related products