Trumeter APM-CT-ANO Digital Bar Graph Meter Lighted characters (Negative), CT Input

In Stock for Immediate Shipment
We will advise immediately if your order will be delayed
 

Trumeter APM-CT-ANO Advanced Panel Meters are Digital Bar Graph Panel Meters for accurately measuring and monitoring AC Currents using standard 0-5A Current Transformers. When used with an external current transformer, the CT meter measures up to 10,000 ampsto an accuracy of 0.5%. The CT meter can be used for a wide range of applications where AC current management is required, including motor control, heating control, industrial power supplies, and energy management. The meter requires 12-24 VAC or VDC power source.

 Overview

 Input:

• Input Range (CT Output Current) 0-5A
• Scale Range is Fully Programmable
• Accuracy 0.5%

 Outputs:

• Up to Two Alarms, Open Collector, DC Outputs
• 12-24VDC Nominal Power Required for Alarm Outputs (Max rated voltage 34VDC)
• Max current 500mA / 0.6W Each Alarm Output
• Analog output 4-20mA (0.02mA Resolution, 0.5% Accuracy)
• If Analog Output is Used Then the Number of Alarm Outputs is Limited to One.

 Power Supply:

• 12-24VAC/VDC

 Display:

• Large 4 Digits (12mm/0.47" high)
• 40 Segment Curved Bar Graph
• 4 Programmable Units/Message Characters
• Selectable backlight colors Red, Green, White. (Colors can be programmed to change based on levels/alarms)
• Wide Viewing Angle
• LCD displayLighted characters (Negative)

 Physical & Software:

• Dimensions 72mm x 72mm x 53mm (2.83 x 2.83 x 2.09)
• Cutout 68mm x 68mm (2.68 x 2.68)
• Connection Type Screw Terminals
• USB B Programming Port
• Free Configuration Software Download

Environmental:

• Temperature - operating -10 to +60C /Temperature - storage -40 to +70C
• IP rating (from the front) IP65
• NEMA rating (from the front) Type 4 & Type 12

 Certifications:

• UL,cUL, CE

Additional Information