West Control Solutions 4100+ 1/4 DIN Temperature/Process Control

Not rated yet

West 1/4 DIN Temperature/Process Control, Universal Input, Self Tuning - ALL CONFIGURATIONS -

  • $682.00
Qty:  

ALL CONFIGURATIONS ARE IN STOCK FOR SAME DAY SHIPMENT

We will advise if shipment will be delayed

Other ranges are available.


The 4100+ updates our popular 4100 controller. With its improved interface, technical functionality and field flexibility, the West 4100+ is not only backwards compatible with the 4100, but provides a range of new features.

P4100sideSM.jpg
  • Jumperless Configuration
  • Auto Detected Hardware
  • Auto or Manual Tuning
  • Heat/Cool Operation Option
  • Process & Loop Alarms Options
  • Ramping setpoint
  • Modbus & ASCII Comms Options
  • Dual Setpoint Selection Options
  • Two process alarms Options
  • Configuration via PC Option
Features

Control Types - Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
Auto/Manual - Selectable from front panel or external selection via digital input, with bumpless transfer.
Output Configuration - Up to 3 possible, for control (Heat & Cool), Alarm or retransmit of Process Value or Setpoint.
Alarm 1 & 2 Types - Process high, process low, SP deviation, band, logical OR with adjustable hysteresis. Also 1 loop alarm for process security.
Human Interface - 4 button operation, dual 4 digit 13mm & 10mm high LED displays with choice of Red/Green (standard) and Red/Red or Green/Green plus 5 LED indicators.
Manual or PC Configuration - Off-line configuration from serial port to dedicated config socket (comms option not required).

Input

Thermocouple - J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%. Scalable within selected range.
RTD - 3 Wire PT100, 50ohm per lead maximum (balanced). Scalable within selected range.
DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
Impedance - >10Mohm for Thermocouple and mV ranges, 47Kohm for V ranges and 5ohm for mA ranges.
Accuracy - +/- 0.1% of input range +/- 1 LSD (T/C CJC better than 1C).
Sampling - 4 per second, 14 bit resolution approximately.
Sensor Break Detection - <2 secs (except zero based DC ranges), control O/P's turn off, high alarms activate for T/C and mV ranges, low alarms activate for RTD, mA or V ranges.
Remote Setpoint (Option) - 0-20mA, 4-20mA, 0-100mV, 0-5V, 1-5V, 0-10V, 2-10V or Potentiometer (2Kohm minimum) Scaleable - 1999-9999. Local/Remote setpoint selected from digital input (supplied as part of Full RSP) or front panel.

Outputs & Options

Control & Alarm Relays - Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations. Output #1 module is now field replaceable
Control SSR Outputs - Drive capability >10V DC in 500ohm min
Solid State (Triac) Outputs - 0.01 to 1 Amp AC 20 to 280V, 47 to 63Hz.
Control DC Outputs - 0-20/4-20mA into 500ohm max, 0-10/2-10/0-5V into 500ohm min. with 2% over and underdrive applied to control outputs. Accuracy typically +/- 0.25%.
Communications - 2 Wire RS485, 1200 to 19200 Baud, Modbus & ASCII protocol (selectable).
Digital Input - Selects between 2 Setpoints or Auto/Manual control using volt free or TTL input

Operating & Environmental

Temperature & RH - 0 to 55C (-20 to 80C storage), 20% to 95%RH non-condensing.
Power Supply - 100-240Vac 50/60Hz (standard) 7.5VA ; 20-48Vac 50/60Hz (option) 7.5VA & 22-65Vdc (option) 4W.
Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
Standards - CE, UL & ULc. recognized.

Additional Information

Click Here to Download Product Literature, Manual, etc.

Click to contact ISE with application assistance, product selection help or models not listed.   Additional models are available.

    • Weight
      3 lbs
    • SKU
      4100+
    • Mnf#/Vendor#
      4100+
  • Input
    0-800F J T/C, 0.0-800.0F J T/C, 0.0-450.0C J T/C, 0-1600F J T/C, 0-1000C J T/C, 0-2500F K T/C, 0-1373C K T/C, -199.9 - 999.9F K T/C, -128.8 - 537.7C K T/C, -199.9 - 752.0F T T/C, -128.8 - 400.0C TK T/C, 0-450C J T/C, -400 - 752F T T/C, -240 - 400C T T/C, 32 -3198F R T/C, 0 - 1759C R T/C, 32 -3204F S T/C, 0 - 1762C S T/C, 211 - 3315F B T/C, 100 - 1824C B T/C, 32 - 2551F N T/C, 0 - 1399C N T/C, -328 - 1401F PT100 RTD, -128.8 - 537.7C PT100 RTD, 0 - 20 mA Linear, 4 - 20 mA Linear, 0 - 50 mVDC Linear, 10 - 50 mVDC Linear, 0 - 5 VDC Linear, 1 - 5 VDC Linear, 0 - 10 VDC Linear, 2 - 10 VDC Linear
  • Output #1
    (0) None, (1) Relay, (2) SSR Drive, (8) Triac, (7) Linear 4-20mADC, (4) Linear 0-20mADC, (5) Linear 0-5VDC, (3) Linear 0-10VDC, (6) Linear 2-10VDC
  • Output #2
    (0) None, (1) Relay (Cool), (2) SSR Drive (Cool), (8) Triac (Cool), (7) Linear 4-20mA, (4) Linear 0-20mADC, (5) Linear 0-5VDC, (3) Linear 0-10VDC, (6) Linear 2-10VDC, (1) Relay - Deviation Alarm, (1) Relay - Band Alarm, (1) Relay - High Process Alarm
  • Output #3
    (0) None, (1) Relay, (3) Linear 0-10VDC Retransmit SP, (5) Linear 0-5VDC Retransmit SP, (4) Linear 0-20mA Retransmit SP, (7) Linear 4-20mADC Retransmit SP, (3) Linear 0-10VDC Retransmit PV, (5) Linear 0-5VDC Retransmit PV, (4) Linear 0-20mADC Retransmit PV, (7) Linear 4-20mADC Retransmit PV, (1) Relay - High Process Alarm, (1) Relay - Deviation Alarm, (1) Relay - Band Alarm, (2) SSR Drive, (8) Transmitter Power Supply
  • Options
    (0) None, (1) RS485 Communications, (3) Dual Setpoint or Digital Input, (4) Basic Remote Setpoint
  • Power Supply
    (0) 90-264 VAC Powered, Select
  • Display Color
    (2) Red Upper - Green Lower, Select
  • Option B
    None, (R) Full Remote Setpoint with Digital Selection of RSP
  • Manufacturer
    West Control Solutions
  • EC44-0
    • Power Supply
      Select
  • Agency Listing
    • UL
      Yes
    • cUL
      Yes
    • CE
      Yes
Customer reviews
Please sign in to add review
Please sign in to add review

Related products

Customers who bought this product also bought

Customers who viewed this product bought