Digital Pressure & Temperature Indicator/Alarm
Digital Pressure/Temperature Indicator, optional alarm outputs. Includes recorder output.
UNIVERSAL PRESSURE INDICATOR
The ISE/Gentan model GT439 Digital Pressure/Temperature indicator/power supply is designed for use with any four leg, 350 ohm Wheatstone bridge pressure transducer. Zero and span can be easily adjusted without removing the module. Shunt calibration is a standard feature.
EASY TO READ LED DISPLAY
The large 4 digit, 1/3 inch LED pressure display is easy to read, even from a distance. Custom face plates are not required for specific scales because every unit can be set for 12 different ranges. Other markings can be easily added for engineering units. The last digit is a fixed zero.
A three digit LED temperature display is also included.
OPTIONAL DUAL ALARM SETPOINTS
Two alarms can be selected for above or below setpoint control. Relays provide N.O. (normally open) and N.C. (normally closed) contacts for maximum flexibility. Adjustments are made through pots on the faceplate.
Provides a choice of recorder outputs, damping constant, transducer sensitivities, input power, shunt-resistor calibrations, peak-hold, and reset options.
|Standard Pressure Ranges:|
Display: 0.1% of full scale
Recorder Output (Pressure Only): 0.1% of full scale
Repeatability: 0.1% of full scale
Size: 1/4 DIN
106-125 or 200-250 VAC, 50/60 hz, 1/8 Amp maximum
Zero Adjustment: 35% with front panel pot
Standard: Selectable 0-1 VDC, 0-2 VDC, 0-5 VDC & 0-10 VDC
|Transducer Power Supply:|
|:8.2 VDC 5.0%|
|Optional Alarm Outputs:|
Dual Relays: 2 SPDT (Single Pole Double Throw)
Thermocouple Types: J or K
Digital Temperature and Pressure Indicator, triple alarm outputs. Includes recorder output.