REPLACED BY MP9610 -- CLICK HERE FOR REPLACEMENT

UNIVERSAL PRESSURE INDICATOR

The ISE/Gentan model GT434 Digital indicator/power supply is designed for use with any four leg, 350 ohm Wheatstone bridge pressure transducer. Zero and span can be easily adjusted without removing the module. Shunt calibration is a standard feature.

0-1,500 psig
0-3,000 psig
0-5,000 psig
0-10,000 psig
0-15,000 psig

Display: 0.1% of full scale

Recorder Output: 0.1% of full scale

Repeatability: 0.1% of full scale
Linearity: 0.1% of full scale
Stability: 0.1% of full scale

Size: 1/4 DIN
Display: 4 digit LED, 1/3 inch height, last digit fixed zero and selectable decimal point
Operating Temperature: 0-140F
Weight: 2.5 lbs.

106-125 or 200-250 VAC, 50/60 hz, 1/8 Amp maximum

Zero Adjustment: 35% with front panel pot
Sensitivity Adjustment (Span): 1-2.5 mV/V or 2.5-5.0 mV/V, Switch selectable and fully adjustable.
Shunt Resistance Calibration: Selectable for Gentran or Dynisco
Response Time (Damping): Selectable at 0.3 or 5.0 seconds

Standard: Selectable 0-1 VDC, 0-2 VDC, 0-5 VDC & 0-10 VDC
Optional: 4-20 mA, Load from 15-600 ohms

Dual Relays: 2 SPDT (Single Pole Double Throw)
Relay Rating: 8 Amp @ 125/250 VAC, 5 Amp @ 30 VDC
Set Point Range: 1-100% of full scale
Accuracy: 0.3% of full scale
Hysteresis: 0.5% of full scale
Indication: Front panel LED's
Mode: Above or below set point
Reset: Automatic or manual