• 0
:

Clear
Clear
Clear all
Model PF1 SCR Power Control (40A) SSR Design
  • Model PF1 SCR Power Control (40A) SSR Design
  • Model PF1 SCR Power Control (40A) SSR Design
  • Model PF1 SCR Power Control (40A) SSR Design

Model PF1 SCR Power Control (40A) SSR Design

SKU: PF1-480-40-01

PF1, Single Phase, Phase Angle Control, 40A for Resistive Loads
Suitable For Up to 480VAC Power Source
4-20mA Command Signal Input

Requires 24VAC to Power Electronics

Not rated yet
0
  • $670.00
 

PF1 SCR Power Controls, Phase Angle (Single Phase, 40 Amps, SSR Type)

PF1 series SCR power controls are single phase, phase angle fired solid state relay power controls designed to deliver maximum power control with all the reliability of much larger units. Phase angle fired units delays the turn on point in each half cycle of the sine waves for precise power control. Optional current limiting is available.

General:
AC Voltage Input
AC Voltage Output
Recommended For RESISTIVE Loads
Phase Angle Fired
Can Be Used with Infra-Red Heaters and on fast responding heater applications.

Delivery:

Quick Ship Item:  Generally in Stock for Same or Next Day Shipment

Specifications:
Load Type:Resistive Only (Not recommended for transformer or inductive loads)
Control Method: Phase Angle Firing of back to back SCRs
Voltage Ratings:Models available for up to 600VAC
Current Ratings: 15-70 Amps
Command Signals:Most standard process signals are supported
Isolation:2500V RMS from power circuit to command signal and ground
Bias and Gain Adjustments: Multi-turn
Heat Sink:Electrically Isolated
Power SourceRequire a 24VAC power source to power electronics


Ambient Temperature Range:0-50Æ’C Operating, 0-70C Storage
Relative Humidity:0-95% Non-condensing


Agency Approvals:UL, cUL Listed, CE Compliant
Warranty:5 Years




ZF1 15-40A Dimensions



Fuse Block

Additional Information

Click Here to Download Product Literature

Click Here to Download Product Manual



Click to contact ISE with application assistance, product selection help or models not listed.   Additional models are available.

    • SKU
      PF1-480-40-01
    • Weight
      7 lbs
  • Voltage
    (120) 120 VAC, (240) 208 or 240 VAC, (400) 400 VAC, (480) 480 VAC
  • Current Rating
    (40) 40 Amps, (40-FK) 40 Amps with Fuse Kit
  • Thermostat Option
    None
  • Options
    None, (CL) Current Limit
  • 24 VAC Transformer
    None, (TX) Include 24 VAC Transformer
  • Command Signal Input
    (01) 4-20mA (Requires 24 VAC), (02) 0-10 VDC (Requires 24 VAC), (03) 0-5 VDC (Requires 24 VAC), (05) Manual Pot Input (Requires 24 VAC and 5K Pot)
  • Manufacturer
    Ametek HDR
  • Made In USA
    No

Related products