Model SHPF1 SCR Power Control (70-120A)

Not rated yet

SHPF1, Compact Size, Single Phase, Phase Angle Control, 70-120A for Resistive, Transformer and Inductive Loads

  • $2015.00
Qty:  

SHPF1 SCR Power Controls, Phase Angle (Single Phase, 70-120Amps)

SHPF1 series SCR power controls are single phase, phase angle fired SCR power controls designed to deliver maximum power control with very high reliability. Phase angle fired units delay the turn on point in each half cycle of the sine waves for precise power control. This model can be used with resistive, inductive and transformer coupled loads. When the optional current limiting is utilized this model can be used with heaters that have a significant change in resistance during heat up. Other common applications for this model include IR heating and vibratory feeders.

General:

AC Voltage Input

AC Voltage Output

Smaller Size Than The PF1 Series

Recommended For RESISTIVE, INDUCTIVE & TRANSFORMER Loads

Phase Angle Fired

Can Be Used with Infra-Red Heaters and to control Vibratory Feeders



Delivery:

Shipment in 2 weeks (Expedited Delivery Possible).



Specifications:

Load Type:Resistive, Inductive and Transformer Loads
Control Method: Phase Angle Firing of back to back SCRs
Voltage Ratings:Models available for up to 600VAC
Current Ratings: 70-120 Amps
Command Signals:Most standard process signals are supported
Isolation:2500V RMS from power circuit to command signal and ground
Bias and Gain Adjustments: Multi-turn
Heat Sink:Electrically Isolated
Fan Cooling90-120A units only
Heat Sink ThermostatOptional 70A, included 90-120A


Ambient Temperature Range:0-50 Degrees C Operating, 0-70 Degrees C Storage
Relative Humidity:0-95% Non-condensing


Agency Approvals:UL, cUL Listed, CE Compliant
Warranty:5 Years




Dimensions:

SCR Power Control SHPF1 70-90 Dimensions



Additional Information

Click Here to Download Product Manual



Click to contact ISE with application assistance, product selection help or models not listed.   Additional models are available.

    • Weight
      30 lbs
    • SKU
      SHPF1 70-120A
    • Mnf#/Vendor#
      SHPF1 70-120A
  • Voltage
    (120) 120 VAC, (240) 208 or 240 VAC, (400) 400 VAC, (480) 480 VAC, (575) 575 VAC
  • Current Rating
    (70) 70 Amps, (90) 90 Amps, (120) 120 Amps
  • Thermostat Option
    None, (NO) N.O. Thermostat (70A Only), (NC) N.C. Thermostat (70A Only), (NO) N.O. Thermostat (90-120A Only), (NC) N.C. Thermostat (90-120A Only)
  • Options
    None, (CL) Current Limit and Over Current Trip, (OC) Over Current Trip, (CR) RMS Current Regulation, (PR) RMS Power Regulation
  • Command Signal Input
    (01) 4-20mA, (02) 0-10 VDC, (03) 0-5 VDC, (05) Manual Pot Input (Requires 5K Pot)
  • Manufacturer
    Ametek HDR
  • Made In USA
    No
  • Agency Listing
    • UL
      Yes
    • cUL
      Yes
    • CE
      Yes
Customer reviews
Please sign in to add review
Please sign in to add review

Customers who bought this product also bought

Customers who viewed this product bought