Trumeter APM-M2-APO Digital Bar Graph Meter Lighted Background (Positive) Display, Programmable Volts / Amps / Frequency
4 Digit Bar Graph Meter Lighted Background (Positive) Display, Programmable for 0-600VAC, 0-600VDC 0-5A AC or 0-5A DC, Frequency, Programmable Colors, (2) Open Collector Alarms and Analog Output. 100-240 VAC Powered.
In Stock for Immediate Shipment
We will advise immediately if your order will be delayed
Trumeter APM-M2-ANO Advanced Panel Meters are Digital Bar Graph Panel Meters for accurately measuring and monitoring Voltage, Amperage or Frequency.The APM-M2 meter can be used for a wide range of applications where AC or DC management is required, including motor control, heating control, industrial power supplies, and energy management. The meter requires 100-240 VAC power source.
Overview
Input:
- Input Range, Programmable for: 0-600V AC or DC Volts, 0-5A AC or DC Amps, 2-400 Hz Frequency
- Scale Range is Programmable When Measuring AC Current with an External Current Transformer
- Accuracy 1% for Volts and Amps, 0.1% for Frequency Measurements
Outputs:
- Up to Two Alarms, Open Collector, DC Outputs
- 12-24VDC Nominal Power Required for Alarm Outputs (Max rated voltage 34VDC)
- Max current 500mA / 0.6W Each Alarm Output
- Analog output 4-20mA (0.02mA Resolution, 0.5% Accuracy)
- If Analog Output is Used Then the Number of Alarm Outputs is Limited to One.
Power Supply:
- 100-240VAC
Display:
- Large 4 Digits (12mm/0.47" high)
- 40 Segment Curved Bar Graph
- 4 Programmable Units/Message Characters
- Selectable backlight colors Red, Green, White. (Colors can be programmed to change based on levels/alarms)
- Wide Viewing Angle
- LCD display Lighted Background (Positive)
Physical & Software:
- Dimensions 72mm x 72mm x 53mm (2.83 x 2.83 x 2.09)
- Cutout 68mm x 68mm (2.68 x 2.68)
- Connection Type Screw Terminals
- USB B Programming Port
- Free Configuration Software Download
Environmental:
- Temperature - operating -10 to +60C /Temperature - storage -40 to +70C
- IP rating (from the front) IP65
- NEMA rating (from the front) Type 4 & Type 12
Certifications:
- UL,cUL, CE
Additional Information
Click to download literature
Click to download manual
Click to download configuration software
Related products
-
4 Digit Bar Graph Meter Multi Color, Lighted Background (positive) Display, 0-5A AC Current Transformer Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted characters (Negative) Display, Programmable for 0-600VAC, 0-600VDC 0-5A AC or 0-5A DC, Frequency, Programmable Colors, (2) Open Collector Alarms and Analog Output. 100-240 VAC Powered.
-
4 Digit Bar Graph Meter Lighted Background (Positive) Display, Process Signal (4-20mA 0-10VDC / 0-50mADC) Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted Background (Positive) Display, DC Current Shunt Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted characters (Negative), 0-5A AC Current Transformer Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted characters (Negative), Process Signal (4-20mA, 0-10VDC / 0-50mADC) Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted characters (Negative) Display, DC Shunt Current Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted characters (Negative), 0-5A AC or DC Input. Programmable Colors, No Outputs 12-24 VAC/DC Powered. Scale can be direct reading or scaled up to 1000 A on the display using AC Current Transformer.
-
100A to 5A Current Transformer for metering applications.
-
100A to 5A Current Transformer for metering applications.
Out of stock -
300A to 5A Current Transformer for metering applications.
Only 3 left in stock. -
500A to 5A Current Transformer for metering applications.
Only 9 left in stock. -
1200A to 5A Current Transformer for metering applications.
Only 3 left in stock. -
4 Digit Bar Graph Meter Lighted characters (Negative) Display, 0-600V AC or DC, Programmable Colors, With Outputs. 12-24 VAC/DC Powered.
-
4 Digit Bar Graph Meter Lighted characters (Positive) Display, 0-600V AC or DC, Programmable Colors, With Outputs. 12-24 VAC/DC Powered.
Customers who bought this product also bought
-
100A to 5A Current Transformer for metering applications.
Out of stock -
4 Digit Bar Graph Meter Multi Color, Lighted Background (positive) Display, 0-5A AC Current Transformer Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
Customers who viewed this product bought
-
4 Digit Bar Graph Meter Lighted Background (Positive) Display, Process Signal (4-20mA 0-10VDC / 0-50mADC) Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
4 Digit Bar Graph Meter Lighted characters (Negative) Display, Programmable for 0-600VAC, 0-600VDC 0-5A AC or 0-5A DC, Frequency, Programmable Colors, (2) Open Collector Alarms and Analog Output. 100-240 VAC Powered.
-
4 Digit Bar Graph Meter Multi Color, Lighted Background (positive) Display, 0-5A AC Current Transformer Input. Programmable Colors, (2) Open Collector Alarms and Analog Output. 12-24 VAC/DC Powered
-
100A to 5A Current Transformer for metering applications.
Out of stock -
Windows Software to setup and configure Trumeter APM (Advanced Panel Meters). The Trumeter APM Configurator allows you to program custom configurations ranges, scales and set alarms on your APM. Not required in all applications, Allows additional flexibility and options in configurating Trumeters.
Note: USB cable not included but required to connect PC to meter. See photo for typical cable that will be needed.