M1010BCT-3 Staco Variac Variable Transformer

ISE VARIAC

M1010BCT-3 Variable Transformer,

240VAC Three Phase Wye 50/60 Hz Input;

0-240VAC L to L or 0-280VAC L to L Output (depending on wiring);

(60 Hz only with stepped up voltage output)

10 Amps Maximum;

Motorized Version with 120V 50/60Hz Motor;

Cased version with cover over terminal block.

Other input arrangements are possible including:

208VAC Three Phase Wye 50/60 Hz Input;

0- 208VAC L to L or 0-243VAC L to L Output (depending on wiring);

10 Amps Maximum;

208VAC Three Phase Wye 400 Hz Input;

0- 208VAC L to L or 0-243VAC L to L Output (depending on wiring);

10 Amps Maximum;

Note: This is a (3) ganged transformer (3 coils on a common shaft). A three phase WYE source (with Neutral) is recommended. Contact ISE technical support regarding use on a DELTA source.

Additional Information

M1010BCT-3 Drawing

Visit 1000-1200 Series Variable Transformers for additional details

All motors are 120VAC 50/60 Hz rated. Motor speeds are shown are for 60 Hz operation. Motors will run 20% slower when operated on 50 Hz. A separate 120VAC 50/60 Hz source is required if transformer is used on a 400 Hz source.

Click to contact ISE with questions or models not listed. Custom units are available.