Model ZF1 SCR Power Control (15-70A) SSR Design (Voltage, Current or Pot Input)

SKU: ZF1 SSR 15-70A

ZF1, Single Phase, Zero Fired, 15-70A for Resistive Loads (Voltage, Current or Potentiometer Input)

Voltage
Current Rating
Thermostat Option
24 VAC Transformer
Command Signal Input

ZF1 SCR Power Controls (Single Phase, 15-70 Amps, SSR Type)

ZF1 series SCR power controls are single phase zero-fired solid state relay power controls designed to deliver maximum power control with all the reliability of much larger units. Zero fired units turn on and off full sine waves rapidly for precise power control. The controls use variable time base for very high output resolution.

General:

AC Voltage Input

AC Voltage Output

For RESISTIVE Loads Only

ZERO FIRED Variable Time Base

Delivery:

Shipment in 1-2 weeks (Expedited Delivery Possible).

Specifications:

Load Type:	Resistive Only (Not for transformer or inductive loads)
Control Method:	Zero Firing of back to back SCRs
Voltage Ratings:	Models available for up to 600VAC
Current Ratings:	15-70 Amps
Command Signals:	Most standard process signals are supported
Isolation:	2500V RMS from power circuit to command signal and ground
Bias and Gain Adjustments:	Multi-turn
Heat Sink:	Electrically Isolated
Power Source	24VAC power source for electronics

Ambient Temperature Range:	0-50 Degrees C Operating, 0-70 Degrees C Storage
Relative Humidity:	0-95% Non-condensing

Agency Approvals:	UL, cUL Listed, CE Compliant
Warranty:	5 Years

Dimensions:

Additional Information

Click Here to Download Product Literature

Click Here to Download Product Manual

Click to contact ISE with application assistance, product selection help or models not listed. Additional models are available.

- SKU
  ZF1 SSR 15-70A
- Weight
  7 lbs
Voltage
(120) 120 VAC, (240) 208 or 240 VAC, (400) 400 VAC, (480) 480 VAC
Current Rating
(15) 15 Amps, (15-FK) 15 Amps with Fuse Kit, (25) 25 Amps, (25-FK) 25 Amps with Fuse Kit, (40) 40 Amps, (40A-FK) 40 Amps with Fuse Kit, (70) 70 Amps, (70-FK) 70 Amps with Fuse Kit
Thermostat Option
None, (NO) N.O. Thermostat, (NC) N.C. Thermostat
24 VAC Transformer
None, (TX) Include 24 VAC Transformer
Command Signal Input
(01) 4-20mA (Requires 24 VAC), (02) 0-10 VDC (Requires 24 VAC), (03) 0-5 VDC (Requires 24 VAC), (05) Manual Pot Input (Requires 24 VAC and 5K Pot)
Manufacturer
Ametek HDR
Made In USA
No
Agency Listing
- UL
  Yes
- cUL
  Yes
- CE
  Yes