Not rated yet
Model ZF1-C SCR Power Control (15-70A) SSR Design (4-20mA Control Input)
ZF1-C, Single Phase, Zero Fired, 15-70A for Resistive Loads (4-20mA Control Input)
ZF1-C SCR Power Controls (Single Phase, 15-70 Amps, SSR Type)
ZF1-C series SCR power controls are single phase zero-fired solid state relay power controls designed to deliver maximum power control with all the reliability of much larger units.Zero fired units turn on and off full sine waves rapidly for precise power control. The controls use variable time base for very high output resolution.
This model has a 4-20mA control input and does not require an additional power source.
General:
AC Voltage Input
AC Voltage Output
For RESISTIVE Loads Only
ZERO FIRED Variable Time Base
Delivery:
Shipment in 1-2 weeks (Expedited Delivery Possible).
Specifications:
| Load Type: | Resistive Only (Not for transformer or inductive loads) |
| Control Method: | Zero Firing of back to back SCRs |
| Voltage Ratings: | Models available for up to 600VAC |
| Current Ratings: | 15-70 Amps |
| Command Signals: | Most standard process signals are supported |
| Isolation: | 2500V RMS from power circuit to command signal and ground |
| Bias and Gain Adjustments: | Multi-turn |
| Heat Sink: | Electrically Isolated |
| Power Source | Self powered. |
| Ambient Temperature Range: | 0-50C Operating, 0-70C Storage |
| Relative Humidity: | 0-95% Non-condensing |
| Agency Approvals: | UL, cUL Listed, CE Compliant |
| Warranty: | 5 Years |
Dimensions:
Additional Information
- Voltage(120) 120 VAC, (240) 208 or 240 VAC, (400) 400 VAC, (480) 480 VAC
- Current Rating(15) 15 Amps, (15-FK) 15 Amps with Fuse Kit, (25) 25 Amps, (25-FK) 25 Amps with Fuse Kit, (40) 40 Amps, (40A-FK) 40 Amps with Fuse Kit, (70) 70 Amps, (70-FK) 70 Amps with Fuse Kit
- Thermostat OptionNone, (NO) N.O. Thermostat, (NC) N.C. Thermostat
- Command Signal Input(C) 4-20mA (Self Powered)
- ManufacturerAmetek HDR
- Made In USANo
- Agency Listing
- ULYes
- cULYes
- CEYes
