M2510-2 Staco Variac Variable Transformer
Variac / 240VAC Single Phase Input / 0-280VAC Output / 25A / Motor Operated / Open Construction
ISE VARIAC
Quality for Over 75 Years.
Not an Inferior, Low Quality, Imported Imitation.
Shipment in 2-3 Weeks Typical
We will advise immediately if your order will be delayed.
M2510-2 VARIAC Variable Transformer,
240VAC Single Phase 50/60 Hz Input;
0-240VAC or 0-280VAC Output (depending on wiring);
25 Amps Maximum;
Motorized Version with 120V 50/60Hz Motor;
Open version (no case).
The customer can also wire in the following common configurations:
120VAC Three Phase Open Delta 50/60 Hz Input;
0-120VAC or 0-140VAC Output (depending on wiring);
25 Amps Maximum;
120/240VAC Single Phase Edison (With Neutral) 50/60 Hz Input;
0-120VAC or 0-140VAC Output; [Line to Neutral];
0-240VAC or 0-280VAC Output (depending on wiring); [Line to Line];
25 Amps Maximum;
This model can be used on 400 Hz with reduced maximum current rating of 18.6A.
Additional Information
Visit 2500 Series Variable Transformers for additional details
Note: This is a (2) ganged transformer (2 coils on a common shaft). Single phase (2) wire, Three phase open delta and Single phase (3) wire (2 hot wires and a neutral) applications can be accommodated.
Motor speeds of 60, 30, 15 and 5 seconds full range travel time are available depending on the transformer size. Available motor speeds can be selected above. All motors are 120VAC 50/60 Hz rated. Motor speeds are shown are for 60 Hz operation. Motors will run 20% slower when operated on 50 Hz. A separate 120VAC 50/60 Hz source is required if transformer is used on a 400 Hz source.
Click to contact ISE with questions or models not listed. Custom units are available.
Customers who viewed this product bought
-
Variac / 120/240VAC Single Phase Input / 0-280VAC Output / 35A / Cased model with internal output fuse.