Not rated yet
Model SHZF1 SCR Power Control (15-60A)
SHZF1, Compact Size, Single Phase, Zero Fired, SCR Power Control, 15-60A for Resistive Loads
SHZF1 SCR Power Controls (Single Phase, 15-60 Amps)
SHZF1 series SCR power controls are single phase zero-fired power controls designed to deliver maximum power control and reliability for the most demanding applications. Zero fired units turn on and off full sine waves rapidly for precise power control. The controls use variable time base for very high output resolution.
General:
AC Voltage Input
AC Voltage Output
Smaller Physical Size than the ZF1 Series
For RESISTIVE Loads Only
ZERO FIRED Variable Time Base
Delivery:
Shipment in 2 weeks (Expedited Delivery Possible).
Specifications:
Load Type: | Resistive Only (Not for transformer or inductive loads) |
Control Method: | Zero Firing of back to back SCRs |
Voltage Ratings: | Models available for up to 600VAC |
Current Ratings: | 15-60 Amps |
Command Signals: | Most standard process signals are supported |
Isolation: | 2500V RMS from power circuit to command signal and ground |
Bias and Gain Adjustments: | Multi-turn |
Heat Sink: | Electrically Isolated |
Fuse Protection | I Degrees R Fusing Included |
Ambient Temperature Range: | 0-50 Degrees C Operating, 0-70 Degrees C Storage |
Relative Humidity: | 0-95% Non-condensing |
Agency Approvals: | UL, cUL Listed, CE Compliant |
Warranty: | 5 Years |
Dimensions:
Additional Information
- Voltage(120) 120 VAC, (240) 208 or 240 VAC, (400) 400 VAC, (480) 480 VAC, (575) 575 VAC
- Current Rating(15) 15 Amps, (30) 30 Amps, (40) 40 Amps, (60) 60 Amps
- Thermostat OptionNone, (NO) N.O. Thermostat, (NC) N.C. Thermostat
- Command Signal Input(01) 4-20mA, (02) 0-10 VDC, (03) 0-5 VDC, (05) Manual Pot Input (Requires 5K Pot)
- ManufacturerAmetek HDR
- Made In USANo
- Agency Listing
- ULYes
- cULYes
- CEYes