Model ZF1 SCR Power Control (350-500A)
ZF1 SCR Power Controls (Single Phase, 350 or 500 Amps Rated)
ZF1 series SCR power controls are single phase zero-fired power controls designed to deliver maximum power control and reliability for the most demanding applications. Zero fired units turn on and off full sine waves rapidly for precise power control. The controls use variable time base for very high output resolution.
General:
AC Voltage Input
AC Voltage Output
For RESISTIVE Loads Only
ZERO FIRED Variable Time Base
Delivery:
Specifications:
Load Type: | Resistive Only (Not for transformer or inductive loads) |
Control Method: | Zero Firing of back to back SCRs |
Voltage Ratings: | Models available for up to 600VAC |
Current Ratings: | 350 or500Amps |
Command Signals: | Most standard process signals are supported |
Isolation: | 2500V RMS from power circuit to command signal and ground |
Bias and Gain Adjustments: | Multi-turn |
Fuse Protection | I Degrees R Fusing Included |
Fan Cooling | Included |
Heat Sink Thermostats | Included |
Ambient Temperature Range: | 0-50 Degrees C Operating, 0-70 Degrees C Storage |
Relative Humidity: | 0-95% Non-condensing |
Agency Approvals: | UL, cUL Listed, CE Compliant |
Warranty: | 5 Years |
Dimensions:
Additional Information
-
Voltage(120) 120 VAC, (240) 208 or 240 VAC, (400) 400 VAC, (480) 480 VAC, (575) 575 VAC
-
Current Rating(350) 350 Amps, 350-LG) 350 Amps with Line and Load Lugs, (500) 500 Amps, (500-LG) 500 Amps with Line and Load Lugs
-
Thermostat Option(NO) N.O. Thermostat, (NC) N.C. Thermostat
-
Command Signal Input(01) 4-20mA, (02) 0-10 VDC, (03) 0-5 VDC, (05) Manual Pot Input (Requires 5K Pot)
-
ManufacturerAmetek HDR
-
Made In USANo
- Agency Listing
-
ULYes
-
cULYes
-
CEYes
-
Customers who viewed this product bought
-
Staco 3PN1010B Variac Variable Transformer, 120V Input, 0-140VAC Output 10 Amps, Portable Model with Case, Cord, Receptacle, Output Fuse and Switch
-
10% off
-