M2520CT Staco Variac Variable Transformer
Variac / 120/ 240VAC Single Phase Input / 0-280VAC Output / 10A / Motor Operated / Cased with Cover Over Terminal Block
ISE VARIAC
Quality for Over 75 Years.
Not an Inferior, Low Quality, Imported Imitation.
Shipment in 2-3 Weeks Typical |
M2520CT VARIAC Variable Transformer, 240VAC Single Phase 50/60 Hz Input; The customer can also wire for the following (Voltage Doubler Connection): 120VAC Single Phase 50/60 Hz Input; This model can be used on 400 Hz Source with the following maximum ratings: 240V Input:Maximum 9.3 Amp @ 0-280V output 120V Input (Voltage Doubler Connection): 9.3 Amps @ 0-150VAC Output; 5.3 Amps @ 215VAC Output; 4.6 Amps @ 240VAC Output; 4 Amps @ 280VAC Output; |
Additional Information
Visit 2500 Series Variable Transformer for additional details
Motor speeds of 60, 30, 15 and 5 seconds full range travel time are available depending on the transformer size. Available motor speeds can be selected above. All motors are 120VAC 50/60 Hz rated. Motor speeds are shown are for 60 Hz operation. Motors will run 20% slower when operated on 50 Hz. A separate 120VAC 50/60 Hz source is required if transformer is used on a 400 Hz source.
Click to contact ISE with questions or models not listed. Custom units are available.
Related products
-
Variac / 120/ 240VAC Single Phase Input / 0-280VAC Output / 10A / Manual Operated / Open Construction
-
Staco Variac / 120/ 240VAC Single Phase Input / 0-280VAC Output / 10A / Manual Operated / Cased with Cover Over Terminal Block
-
Staco 3PN2520B Variac Variable Transformer, 240V Input, 0-280VAC Output 10 Amps, Portable Model with Case, Cord, Receptacle, Output Fuse and Switch