M1010BCT-3 Staco Variac Variable Transformer
Variac / 240VAC Three Phase Input / 0-280VAC Output / 10A / Motor Operated / Case Over Coils and Terminal Blocks.
ISE VARIAC
Quality for Over 75 Years.
Not an Inferior, Low Quality, Imported Imitation.
M1010BCT-3 Variable Transformer,
240VAC Three Phase Wye 50/60 Hz Input;
0-240VAC L to L or 0-280VAC L to L Output (depending on wiring);
(60 Hz only with stepped up voltage output)
10 Amps Maximum;
Motorized Version with 120V 50/60Hz Motor;
Cased version with cover over terminal block.
Other input arrangements are possible including:
208VAC Three Phase Wye 50/60 Hz Input;
0- 208VAC L to L or 0-243VAC L to L Output (depending on wiring);
10 Amps Maximum;
208VAC Three Phase Wye 400 Hz Input;
0- 208VAC L to L or 0-243VAC L to L Output (depending on wiring);
10 Amps Maximum;
Note: This is a (3) ganged transformer (3 coils on a common shaft). A three phase WYE source (with Neutral) is recommended. Contact ISE technical support regarding use on a DELTA source.
Additional Information
Visit 1000-1200 Series Variable Transformers for additional details
Motor speeds of 60, 30, 15 and 5 seconds full range travel time are available depending on the transformer size. Available motor speeds can be selected above. All motors are 120VAC 50/60 Hz rated. Motor speeds are shown are for 60 Hz operation. Motors will run 20% slower when operated on 50 Hz. A separate 120VAC 50/60 Hz source is required if transformer is used on a 400 Hz source.
Click to contact ISE with questions or models not listed. Custom units are available.