Trumeter APM-SHUNT-ANO Digital Bar Graph Meter Lighted characters (Negative), DC Shunt Input

In Stock for Immediate Shipment
 We will advise immediately if your order will be delayed
 

Trumeter APM-SHUNT-ANO Advanced Panel Meters are Digital Bar Graph Panel Meters for accurately measuring and monitoring DC Currents using standard standard DC shunts with up to 1VDC output. When used with an external shunt meter measures up to 10,000 amps to an accuracy of 0.1%. The APM-SHUNT meter can be used for a wide range of applications where DC current management is required, including motor control, heating control, industrial power supplies, and energy management. The meter requires 12-24 VAC or VDC power source.

 Overview

 Input:

• Input Range: DC Shunt up to 0-1VDC
• Scale Range is Fully Programmable
• Accuracy 0.1% or 0.5mV whichever is greater

 Outputs:

• Up to Two Alarms, Open Collector, DC Outputs
• 12-24VDC Nominal Power Required for Alarm Outputs (Max rated voltage 34VDC)
• Max current 500mA / 0.6W Each Alarm Output
• Analog output 4-20mA (0.02mA Resolution, 0.5% Accuracy)
• If Analog Output is Used Then the Number of Alarm Outputs is Limited to One.

 Power Supply:

• 12-24VAC/VDC

 Display:

• Large 4 Digits (12mm/0.47" high)
• 40 Segment Curved Bar Graph
• 4 Programmable Units/Message Characters
• Selectable backlight colors Red, Green, White. (Colors can be programmed to change based on levels/alarms)
• Wide Viewing Angle
• LCD displayLighted characters (Negative)

 Physical & Software:

• Dimensions 72mm x 72mm x 53mm (2.83 x 2.83 x 2.09)
• Cutout 68mm x 68mm (2.68 x 2.68)
• Connection Type Screw Terminals
• USB B Programming Port
• Free Configuration Software Download

Environmental:

• Temperature - operating -10 to +60C /Temperature - storage -40 to +70C
• IP rating (from the front) IP65
• NEMA rating (from the front) Type 4 & Type 12

 Certifications:

• UL,cUL, CE

Additional Information