| Search: |
|
Melt Pressure Transducers for Plastics Processing MK100 MELT PRESSURE TRANSDUCERSThe diaphragm uses a NaK filled capillary for high temperature stability. Four active arm wheatstone bridge strain gage ensures high accuracy. This model has a rigid stem for easy installation.  MK200 MELT PRESSURE TRANSDUCERSThe diaphragm uses a NaK filled capillary for high temperature stability. This model includes an 18 inch capillary with stainless steel armour protection. The extended capillary provides further thermal isolation. Four active arm wheatstone bridge strain gage ensures high accuracy. This model has a rigid stem for easy installation.  MKJ200 /MKK200 MELT PRESSURE TRANSDUCERS WITH THERMOCOUPLESame as the MK200 Pressure Transducer with the addition of J or K Thermocouple Temperature Sensor. Unique design allows for the temperature sensor to be field replaceable.  Melt Pressure Indicators / Alarms for Plastics ProcessingMP9410 1/8 DIN Pressure Indicator with (2) Alarms350ohm STRAIN GAGE INPUT  MP9610 1/4 DIN Pressure Indicator with Dual AlarmsPRESSURE 350ohm STRAIN GAGE INPUT  MPT9610 1/4 DIN Pressure Temperature Indicator with (3) AlarmsPRESSURE 350ohm STRAIN GAGE INPUT TEMPERATURE TYPE J THERMOCOUPLE TEMPERATURE INPUTSINGLE TEMPERATURE ALARM OUTPUT  MG-IND Pressure Indicator with (1) Alarm350ohm STRAIN GAGE INPUT  |
|
ISE, Inc. 10100 Royalton Rd. Cleveland, OH 44133 USA Tel: 440-237-3200 - Fax 440-237-1744 |
||
Email ISE Cleveland
|
||
|
|
||
|
|
||
Copyright © 2023 ISE, Inc. All rights reserved.
VARIAC® is the registered trademark of ISE, Inc.